Primavera Aroma Fountain Rondo warm grey matt: Unit: 1 piece

Fragrant water feature for a soothing indoor climate

: Price: EUR 68,99

: Note: Including value added tax, plus shipping costs

Add to Watchlist Rate this Product

Primavera Aroma Fountain Rondo warm grey matt. The Rondo aroma fountain is made of ceramic. Each fountain is unique.
Scented fountains create a healthy and pleasant room climate through room aromatisation and air humidification. Thanks to their beautiful appearance, they are an eye-catcher in your living and working rooms.

Aroma Fountains...:

create a pleasant air humidification, especially in centrally heated rooms.
refresh and purify the atmosphere.
increase your personal well-being and creativity through scented indoor air.
are a nice eye-catcher.
have a gentle effect on body, mind and soul.

Your Aroma Fountain consists of:

a cup to be filled with water.
a fountain ball.
a submersible pump with a connection to the fountain ball.

Important instructions:

Please read these instructions for use and the instructions for use of the supplied fountain pump carefully before putting the scent fountain into operation and keep both instructions for use in a safe place. In particular, the safety regulations of the fountain pump must be strictly observed!
The fountain should be emptied and washed out daily after use. Afterwards please let all parts dry completely before the fountain is put into operation again.

How to set up your Primavera Aroma Fountain:

Please fill the bowl of the fountain 3/4th with water. To do this, it is best to use soft rain water, boiled tap water, filtered or distilled water. This will protect the fountain and the pump.
Be sure to place the fountain on a non-slippery, water-resistant surface and childproof.
Please keep away from children and disoriented people.
Do not operate the aroma fountain unsupervised!
Push the connecting hose through the upper outlet of the upper part of the well until both edges are even. To do this, moisten the connection hose with a little water.
Then insert the pump nozzle of the fountain pump into the connecting hose from below.
You can regulate the bubble strength by turning the pump nozzle.
The upper part of the well with the pump is then placed centrally on the bowl. The hose should not protrude from the source ball opening at the top.
Only then plug the power cord of the pump into the wall socket (230V). With starting problems, please pull the plug and pour a little water from above through the fountain ball. Then plug in again.
Now drop your desired fragrance mixture into the fountain. Please use - depending on the intensity - a maximum of 5 - 10 drops of the fragrance mixture.

How it works:

The capacity of the pump and the bubbling intensity are adjustable by turning the pump nozzle.
Please regularly refill with water so that the pump is completely under water.
Clean your fountain regularly, but at least weekly, and supply it with fresh water.
When cleaning always pull the power plug.
The foutain pump is designed for continuous operation.

Thorough care and maintenance of your scent fountain is important.

The manufacturer recommends that you regularly clean your fountain, so that you can enjoy it for a long time.
The frequency of a complete cleaning depends on:
the limescale content of your water,
the fragrance mixture used,
the room temperature.

Please do a complete cleaning every week!

Always pull the power plug before cleaning!
Then rinse the individual parts with a mild detergent.
Now fill in fresh water, about 20 degrees warm, add a strong dash of vinegar essence or 1 tablespoon of citric acid and let the fountain run for several hours. After the cleaning run has been completed, the pump and the fountain must be rinsed thoroughly.
Then let all parts dry completely. You will immediately notice the positive effect and the special clarity of your gently rippling oasis.
If you want to change fragrances, it is advisable to carry out a complete cleaning.

Cleaning the pump in the event of severe calcification or contamination:

Pull the main plug out of the socket!
Remove the pump and pull off the hose.
Pre-clean all parts with a mild detergent.
Remove the base plate by pressing against the pump nozzle.
Insert a thin screwdriver into the small recess next to the rotor and pull out the rotor.
In the case of oil residues, all parts must be soaked in cleaning alcohol or cleaned with cleaning alcohol and a brush.
If there are limescale residues, soak all parts in water with vinegar essence or 1 tablespoon of citric acid and use them to clean.
After cleaning, replace the rotor. The rotor must now swing back and forth in the direction of rotation if it is lightly pushed by hand. If this is not the case, the inner pin in the pump and the pin guide in the rotor must be cleaned again. Finally assemble the pump parts completely and carry out a test run in the water.

Note:

Please read carefully the information on the label of the essential oils and fragrance mixture you use.

Disclaimer:

The manufacturer excludes all liability for damage caused by improper use or damage caused by the improper use of essential oils / fragrance mixtures.

Disposal:

The fountain pump contains electronic components. Dispose of the fountain pump only at the collection points specially set up at your place of residence. Make sure that none of the parts go into household waste for disposal.